How Much Does It Cost to Transport Heavy Equipment? 2026 Pricing Guide
    pricing9 min read

    How Much Does It Cost to Transport Heavy Equipment? 2026 Pricing Guide

    KeepShippin Team
    November 21, 2026
    All Articles

    Heavy equipment transport costs in 2026 by machine type: excavators, skid steers, bulldozers, forklifts, tractors and cranes. Trailer types, permits and per-mile rates.


    How Much Does It Cost to Transport Heavy Equipment? 2026 Pricing Guide


    Heavy equipment transport costs from about $1,100 for a small forklift to $50,000+ for a large crane move in 2026. Most standard construction machines, such as skid steers, mini excavators, and farm tractors, move for roughly $1,200 to $4,500, while full-size excavators and bulldozers on RGN lowboy trailers run $3,500 to $12,000 or more.


    The price depends on what you are hauling, how much it weighs, how far it goes, which trailer it needs, and whether permits are required. Below is a breakdown of each factor with real price ranges.


    Equipment Transport Cost by Machine Type


    EquipmentTypical WeightTrailer TypeCost Range
    Forklift3,000–50,000 lbsFlatbed; step-deck for rough terrain$1,100 – $5,500
    Skid steer5,000–14,000 lbsFlatbed or step-deck$1,200 – $4,500
    Farm tractor2,000–50,000+ lbsFlatbed; step-deck or RGN for 4WD$1,200 – $7,500
    Excavator1,700–100,000+ lbsFlatbed, step-deck, or RGN lowboy$1,400 – $8,000
    Bulldozer8,000–230,000+ lbsStep-deck (small), RGN lowboy (large)$1,600 – $12,000+
    Crane20,000–1,000,000+ lbsMulti-axle RGN or specialized trailers$3,500 – $50,000+ per load

    Here are real examples on a 1,000-mile haul:


  1. Skid steer: $1,400 to $2,500
  2. Mid-size utility tractor (8,000 lbs): $1,400 to $2,400
  3. 5,000 lb warehouse forklift: $1,200 to $2,000
  4. Mini excavator (under 6 tons): $1,400 to $3,500
  5. D5-class dozer (18,000 lbs): $2,200 to $3,800
  6. Full-size excavator (30+ tons): $3,500 to $8,000+
  7. D8-class dozer (70,000+ lbs): $5,000 to $12,000+

  8. Learn more on our excavator transport, skid steer transport, and bulldozer transport pages.


    Flatbed vs Step Deck vs RGN Lowboy


    The trailer is the biggest single driver of price after distance.


    TrailerBest ForMarket Rate (Per Mile, All-In)Minimum
    FlatbedSkid steers, forklifts, mini excavators, utility tractorsAbout $2.45 – $3.00$750
    Step deckTaller loads, midi excavators, small dozers, rough-terrain forkliftsAbout $2.70 – $3.30$900
    RGN lowboyHeavy, tall machines: full-size excavators, large dozers, cranesAbout $3.75 – $5.00+$1,400

    A flatbed is a standard open deck, about 48 feet, that can carry two or three skid steers at once. A step deck has a lower rear deck for taller machines. An RGN (removable gooseneck) lowboy has the lowest deck height, which lets heavy, tall equipment stay within road height limits. The higher the equipment spec, the more the carrier charges per mile.


    Permits and Oversize Loads


    Many large machines exceed legal limits for width, height, or weight and need oversize or overweight permits. A full-size excavator or large dozer often does, while a skid steer or forklift typically does not. Permit rules and fees vary by state, and KeepShippin coordinates the applications, pilot cars, and route surveys for the states along your route so you do not have to file them yourself.


  9. Pilot cars may be required for wide or long loads
  10. Route surveys check bridges and clearances for the biggest machines
  11. Permit lead time can add days to the schedule

  12. Looking for a quick shipping quote?

    Get instant pricing — no obligations, no phone calls.

    Our route pages also use a rough cost index relative to a standard excavator: a compact skid steer or mini excavator around 0.7x to 0.75x, a tractor around 0.95x, a bulldozer around 1.3x, and a crane or large machine around 2.5x.


    Cost Per Mile: Route Examples


    RouteDistanceStandard PriceApprox. Per MileTransit
    Texas to Florida1,066 mi$1,200 – $1,800$1.13 – $1.697-10 days
    Los Angeles to Dallas1,608 mi$1,400 – $2,300$0.87 – $1.4310-14 days
    California to Texas1,782 mi$1,600 – $2,500$0.90 – $1.4010-14 days
    California to Florida2,786 mi$2,200 – $3,300$0.79 – $1.1814-18 days
    California to New York3,179 mi$2,500 – $3,800$0.79 – $1.2014-18 days

    These ranges cover standard construction equipment on open lowboy trailers. Oversized or extremely heavy loads (80,000+ lbs) require a custom quote. Check pricing for California to Texas and Texas to Florida.


    What Else Affects the Quote?


    Weight and dimensions. Every extra ton and every inch of height can change the trailer needed.


    Attachments. Remove buckets, forks, front loaders, and mower decks, or ship them separately. This lowers weight and the center of gravity.


    Condition. Machines should be operable for self-loading if required, so tell us up front if one is not running.


    Multi-unit loads. Two or three skid steers can often share one trailer. Bundling saves 15 to 25 percent per unit.


    Location. Job sites with limited access or no loading ramp can add time and cost.


    Timing. Equipment moves year-round in most states. State pricing reflects this: Texas ranges from $1,200 to $2,700 and Florida from $1,400 to $3,150.


    Preparing Equipment for Transport


  13. Lower arms, buckets, and booms to minimum transport height
  14. Remove or secure attachments flat
  15. Lower forklift masts to travel position
  16. Remove or close and certify propane tanks
  17. Retract hydraulic cylinders and ensure tracks can be blocked
  18. Photograph the machine at pickup and sign the Bill of Lading

  19. Carriers are FMCSA-licensed and hold $1M+ liability insurance with cargo coverage for heavy equipment. Pre-load inspection with photos is standard.


    Frequently Asked Questions


    What is the cheapest way to transport heavy equipment?

    A standard flatbed is the cheapest option and works for skid steers, forklifts, mini excavators, and utility tractors. Bundling multiple machines on one flatbed lowers the cost per unit.


    How much does it cost to ship an excavator?

    Excavator transport runs $1,400 to $8,000+. Mini excavators average $1,400 to $3,500 per 1,000 miles, and full-size units average $3,500 to $8,000+.


    Do I need a permit to haul my equipment?

    Many large machines do, and rules vary by state. Permits are coordinated for each state on your route as part of your quote.


    How long does equipment transport take?

    Most moves take about 7 to 18 days depending on distance and permit needs, with long coast-to-coast lanes at the high end.


    Can I ship equipment with attachments on it?

    Detachable implements are best removed. They can often ship on the same trailer for a bundled rate.


    How is crane transport priced?

    Cranes are priced per load, from $3,500 to $50,000+. A rough-terrain crane move of 500 miles needing 2 to 3 loads averages $8,000 to $18,000.




    Ready to move your equipment? Get a real price based on your machine and route. See all machine types on our heavy equipment transport hub or start your free quote below.


    Get Your Free Shipping Quote

    Instant pricing in 30 seconds — no phone calls, no spam, no commitment.

    • No personal info required to see rates
    • Compare open & enclosed transport prices
    • Licensed & insured carriers only

    Ready to Ship Your Vehicle?

    Get your free, instant quote in 30 seconds. Compare prices from trusted carriers nationwide.

    No obligations Licensed & insured 5-star rated